
Convert any freezer into a kegerator! Just plug the freezer into the outlet cord, place the gas-filled sensor in the area to be controlled and program the temperature. This fully wired digital thermostat simply turns off the freezer when it reaches the specified temperature. Other features include a lockable touchpad temperature adjustment, a 6-foot power cord and a 6-foot outlet cord.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Great Value
I use the thermostat to control the temperature in a chest freezer that I use for fermenting beer (35-55 F). The controller works great for this purpose. I also have a second one that I plan on using to operate a HERMS device for my mashing system. You can set the controller to operate a heater or cooling device but you must reposition "jumpers" inside the unit (not difficult but a pain if you plan on doing it often). If you want a unit that switches automatically betweem cooling and heating, you are better off with the more expensive Ranco controller.
This particular controller will allow you to set the target temperature (as either a closing or openning point), the number of degrees of variance from target before the unit turns on/off, a time delay before the unit is allowed to reactivate the device(great for extending the life of a freezer or fridge), power supply on/off option in the case of unit failure and options for using remote monitoring/controlling if you...
Click here to read the full review for more information about this product.
Simple to use
Its easy to use...the manual makes it seem overly complicated.
SP: setpoint (for my purpose 67) the temperature you want the thing to try and maintain.
dIF: differential (1 to 30F, default = 5) I leave at default, this is the point + or - from the setpoint temp (so 62 to 73 in my case.
ASd: anti-short cycle delay (0 to 12 minutes, default = 1)I set to 12 minutes, just to put the least amount of stress on the compressor.
I recommend it!
Works great
Using this for home brewing. Connected to a small chest freezer. It controlled my 7 gallon fermentation vessel as well as the corny kegs. Setting the thresholds could be easier but once you understand it works exactly as advertised.
Product Features :
- Fully Wired Digital Thermostat
- Gas-Filled Sensor (1/16" diameter)
- Lockable Front Panel Touchpad Adjustment
- 6' Power Cord
- Turns off the freezer when it reaches the specified temperature
Rating : 4.6
List Price : $66.95

0 comments:
Post a Comment